Midge •

Black Beauty

A slim, dark midge pupa pattern designed by Pat Dorsey: a black thread body ribbed with copper wire and a small black dubbed head. It excels in winter tailwater conditions when trout are keying on tiny midge pupae drifting in slow, clear water.

Tie this Fly
Black Beauty

How to Tie the Black Beauty

PartMaterial
HookTMC 2487 or 2488 #16–24
Threadblack UTC 70 denier or 8/0 black (also forms the body)
Ribcopper wire, extra fine (#22–24 flies) or fine (#16–20)
Headblack beaver or rabbit dubbing

Step-by-Step Instructions

  1. 1

    Start Thread

    Attach the thread at the rear of the index point (just behind the eye) and clip the tag.

  2. 2

    Tie In Wire

    Tie in a six-inch length of copper wire at the rear edge of the index point.

  3. 3

    Thread Body

    Wrap the thread back over the wire to the bend, forming a smooth, even body, then return the thread to the rear of the index point with tight, concentric wraps.

  4. 4

    Rib

    Spiral the wire forward in five to seven open turns to the index point; secure it with thread wraps and snap off the excess.

  5. 5

    Dubbed Head

    Twist a small amount of black dubbing onto the thread and wrap a small head from the rear of the index point forward to just behind the eye.

  6. 6

    Finish

    Whip finish at the index point and clip the thread.

How to Fish the Black Beauty

Fish the Black Beauty as a dropper below a larger point fly or indicator. In tailwaters, present it in slow seams and soft pockets where midge pupae concentrate. Use 5X or 6X tippet and fish it dead drift. During winter hatches, it's most effective in sizes #20-24. The pattern works exceptionally well in clear, cold water when trout are selective about midge patterns. Vary depth by adjusting split shot or using different indicator positions.