Foam Attractor •

Chernobyl Ant

Foam terrestrial attractor that came out of Utah's Green River country in the 1990s: a black craft-foam overbody over a segmented tan foam underbody, bound over a red chenille base, with rubber legs at the rear and front tie-downs and orange foam hot spots on top for visibility. Floats like a cork and crosses over for hoppers, crickets, cicadas and stoneflies; works as a stand-alone dry or the hopper in a hopper-dropper on tailwaters and freestones across the West.

Tie this Fly
Chernobyl Ant

How to Tie the Chernobyl Ant

PartMaterial
Hook3XL nymph hook (Dai-Riki #710), #6-12
Threadbrown 6/0 or 140-denier
Basered chenille bound along the shank as the foam base
Underbodytan 2mm craft foam strip, a hook gap wide, segmented
Overbodyblack 2mm craft foam strip, a hook gap wide
Legsround rubber legs, a folded loop at the rear and front tie-downs (barred tan in the catalog image)
Hot Spotsorange craft foam circles on top at the tie-downs
CementSally Hansen Hard As Nails or head cement

Step-by-Step Instructions

  1. 1

    Start Thread

    Start the thread on the shank, leaving some space behind the eye, and wrap rearward.

  2. 2

    Chenille Base

    Bind red chenille along the shank as a foundation that keeps the foam from spinning, and trim it at the bend to leave a small red accent.

  3. 3

    Tan Underbody

    Cut tan and black foam strips a hook gap wide. Tie in the tan strip with about 1/4 inch past the eye, wrap it around the chenille base, and segment it by moving the thread rearward on a diagonal, each segment smaller toward the bend.

  4. 4

    Rear Legs

    Fold a rubber leg strand in half and bind the loop at the rear tie-down.

  5. 5

    Black Overbody

    Square the end of the black foam strip, thread it through the rear leg loop and bind it down at the rear with progressively tighter wraps.

  6. 6

    Hot Spots

    Place orange foam circles on top of the black foam and bind them with the tie-down wraps.

  7. 7

    Front Legs

    Fold and bind the front legs the same way, pull the black foam forward between them, then pull the foam and legs back and make the same segmenting wraps as before.

  8. 8

    Finish

    Whip-finish, trim the foam and legs, and coat the rear and front wraps with Hard As Nails or head cement.

How to Fish the Chernobyl Ant

High-floating terrestrial attractor effective during summer and early fall when large terrestrials are active. Works well in both moving water (riffles, seams, banks) and stillwater situations. The fluorescent orange/yellow indicator provides excellent visibility in glare or choppy conditions. Best fished with drag-free drift along grassy banks, undercut areas, and near structure where terrestrials accumulate. Effective as standalone dry fly or as indicator dry in dry-dropper rigs. Size down (#10-12) for selective fish or heavily pressured waters. Use darker colors (black, brown) in clear water; brighter colors with indicator for visibility in challenging light conditions. Works particularly well after windstorms or warm afternoons when terrestrials are blown into the water.