How to Tie the Hippie Stomper
| Part | Material |
|---|---|
| Hook | TMC 3761 #6–18 (Umpqua Stubby T also works for #16–18) |
| Thread | Ultra Thread 70 denier, black |
| Tail | moose body hair, about a hook length |
| Body | two layers of foam cut to hook-gap width with pointed ends: black on top, belly color to match the underbody (2mm black over 1mm color for #6–10, 1mm over 1mm for #12–16, 1mm over 0.5mm for #18) |
| Underbody | holographic Flashabou, two strands, color to match the belly foam |
| Legs | fine round rubber, barred |
| Wing | McFlylon, dun or white |
| Hackle | grizzly |
| Glue | superglue on the underbody foam and at the head; head cement over the Flashabou body |
Step-by-Step Instructions
- 1
Thread Base and Tail
Lay down a tight thread base and tie in a moose body hair tail about equal to the hook length.
- 2
Foam Strips
Cut two foam strips the width of the hook gap, sharpen their ends to points, and tie them in at the rear of the shank, black overbody on top of the belly color.
- 3
Flashabou Underbody
Tie in two strands of holographic Flashabou doubled over the thread, wrap them tightly to the midpoint of the hook and tie off.
- 4
Pull the Foam Forward
Pull the underbody (belly) foam forward and tie it down at the midpoint. Put a drop of superglue on top of it, then pull the black overbody forward over it and secure it at the same point.
- 5
Thorax
Advance the thread to the end of the shank, tie the foam down there and bury the thorax foam under thread wraps.
- 6
Wing and Hackle
Tie a McFlylon wing on top over the front half of the fly, then tie in the grizzly hackle.
- 7
Legs
Tie a barred rubber leg along the near side, starting at the midpoint of the shank and stretching it forward as you secure it to the front of the thorax. Repeat on the far side.
- 8
Wrap Hackle
Wrap the hackle forward densely and tie it off. Grillos hackles this fly heavily for buoyancy.
- 9
Tie Off and Trim
Pull the foam head and wing out of the way and tie off the thread at the eye with a little glue. Trim the foam head to the length of the thorax, the rear of the wing to half the overbody length, the front of the wing slightly longer than the hackle, and the legs slightly shorter than the whole fly.
- 10
Trim Hackle and Seal
Trim the underside of the hackle nearly flat so the fly sits upright and low, and coat the Flashabou body with head cement for durability.
How to Fish the Hippie Stomper
Versatile high-floating attractor pattern effective during summer through early fall when terrestrials (beetles, hoppers, ants) are active. Dead drift along grassy banks, undercut areas, and overhanging vegetation where terrestrials fall naturally. The dual-layer foam body provides exceptional floatation and durability, making it ideal for dry-dropper rigs (acts as excellent indicator). The white/cream hi-vis wing post enhances visibility in glare or choppy conditions. Works particularly well on freestone rivers with meadow edges and willow-lined banks. Best fished with drag-free drift - terrestrials drift helplessly when they hit the water. Present near bank structure, root wads, and seams where trout hold waiting for terrestrials. Effective in multiple colors: black (general), purple (striking/attractor), red (visibility), olive/tan (natural tones). Size down (#12-14) for selective fish or heavily pressured waters. Best fished with medium tippet (4X-5X). Excellent searching pattern when fish are actively feeding on surface terrestrials.




